Used Injection Molding Machines for Plastic Buckets & Pails

Plastic buckets, pails & thin-wall containers

Buckets and pails — from 1-litre paint pails to 20-litre industrial buckets — are among the most common products made on used injection molding machines. Food-grade buckets, chemical pails, paint containers and household tubs all fall into this application.

Typical machine requirements: clamp force around 180–450 tons, enough tie-bar space for the bucket mold, sufficient shot weight for the part plus runner, and a mold height that fits the machine’s daylight. Thin-wall buckets cycle faster and usually need the higher end of the tonnage range with a fast injection unit.

Key requirements

The figures below are typical industry guidance — the right machine always depends on your exact mold and product.

• Clamp force: ~180–450T for most bucket and pail work (thin-wall, fast-cycle jobs sit at the higher end)
• Tie-bar space: wide enough to fit the bucket mold footprint
• Shot weight: must cover the part plus runner with a comfortable margin
• Mold height / daylight: must fit the bucket mold stack height

Current stock that fits

Stock rotates quickly. Need bigger sizes or a thin-wall high-speed machine? Tell us your bucket size and target cycle time — we’ll match or source a machine for you.